If you own tile, drywall, or other roofing materials in your house, you should definitely think about applying roof flashings to that area to protect your precious materials. Roof flashing is actually one of the vital parts of your entire roof. It’s the thin flexible material, usually aluminum, which is used to seal joints in areas that often get a whole lot of moisture, like valleys, ceilings, dormers, and skylights. Without flashing, your roofs can easily get damaged by water seeping in through cracks or breaches.
The first step to take after discovering a crack or dent
in your roof is to find the source of damage. If your roof has experienced some heavy water flow, it could easily be the result of leaky plumbing pipes or faulty roofing materials. After finding the source of damage, your next step should be to remove any debris that could potentially damage the roof again. This could include loose shingles, excess roofing cement, and so on. These things should all be removed before you move on to the repair itself.
When doing repairs to small holes in your drywall or roofing tiles, use only a small amount of roof flashing until you are confident in your abilities. Try not to rough up the area with too much pressure as this could lead to additional damage, especially if the hole is too small. If you do not feel comfortable with the repair job, simply leave it be until a more experienced handyman comes along. Some experienced painters can roughen up large holes just using a wire brush and some sandpaper to get an overall smooth look. If you don’t want to spend this much money or time on such repairs, simply contact the manufacturer of your roofing materials and ask for some advice on how to repair small holes.
If your damaged roof flashings have resulted from some sort of leaky pipe or plumbing problem, you will need to start by sealing the area around the hole using some type of caulk. However, if the leak is from a metal shingle or other metal roofing product, the caulk will most likely be rendered useless because these products are not water-resistant at all. So in order to solve the issue, you need to repair the roof flashing first, then work on the leaky area.
Once you have repaired the roof flashing, it is then time to move on to the next step of repairing the shingles. Start by removing about half of the original shingle layer by scraping it back with a utility knife or chisel. Then take some sandpaper and rub down the exposed shingle area to make it easier to remove the damaged shingles with another set of sandpaper. Once you have done this, remove the remaining shingles from their slots using a razor blade. You will now need to replace them with new ones.
The final step of fixing your skylight and roof flashing involves installing the new skylight shingles. HouseCheckNSW provides independent and professional Building Inspections of roof flashing experts are available including areas such as the Taren Point, Sydney, NSW, and surrounding areas. Cut copper sheets to fit the shingles snugly onto the bottom of the copper roofing. In order to keep the copper sheeting in place after you install it, tape the edges of the shingle together with electrical tape. Then attach the skylight and the copper sheeting. Finally, screw on the end caps of the skylight so that you can enjoy the light that you have installed into your home.